As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.
Elektron-Users Elektron Forum Sandbox Machinedrum Remote sl25 Template to control machine fx (1 viewing)
Go to bottom Post Reply
TOPIC: Machinedrum Remote sl25 Template to control machine fx
#77177
King Koopa
Posts: 295
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
anselmi wrote:
kamrog wrote:
NICE !

I try with my Remote Zero SL and I leave my feedback!

thanks


+1


talking about SysEx, did you transcribe the code manually? using the editor?

I was looking for a LEARN function that allows me to enter SysEx in a easier way, just moving a knob in a piece of gear that sends that kind of data...did the remote SL got something like that?

man, that was hard!(cause i'm not so in programmin languages) that was a totally new expirience
i found some tutorials how to use this whole sysex thing. then i looked in the manual for the desired codes and mapped them on my sl25 with the template editor.
actually i use the template only till i got my midicommand( can't wait to get one!!!) then all my problems are solved (oh, i forgot. i need a mono too)


afaik, the automap does work only on vst. a learn function definitley would be great
  The topic has been locked.
#77184
Game & Watch
Posts: 2668
0
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
cheers for the cool idea..
using Ctrl/Cmd-M, with Ableton enters midi learn mode.
merely select a rotary or fader on the software interface, move a md rotary whilst connected via TM-1 or other device... ableton will recognize and display the value along with cc number.
  The topic has been locked.
#77186
Chain Chomp
Posts: 392
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
Trying out your template, my values on the MD are jumping to 127 and locking there at the moment when I turn an SL encoder...
  The topic has been locked.
#77191
King Koopa
Posts: 295
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
Indigo Fire wrote:
Trying out your template, my values on the MD are jumping to 127 and locking there at the moment when I turn an SL encoder...


oh, i forgot: you must change the data type of every rotary encoder:

after uploading the template press and hold edit and one of the assigned encoder and change DATA TYPE = Roland.


do this with all rotary encoders and voilà, there you go. hope that helped. cheers
  The topic has been locked.
#77196
Chain Chomp
Posts: 392
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
Yea, I did this, still jumping to 127.

By the way EmTeX, great idea, thanks... just have to get it working. ( not sure if it's just me?)
  The topic has been locked.
#77197
King Koopa
Posts: 295
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
hmm, strange. would be interesting to know if someone other has the same problem.

i really don't know why this happens. my template works like a charm.


hope the best that you get this to work and sorry 4 the problems ( actually i'm not a programmer )


in the edit mode of the rotary encoders, have you selected display type= 0-127 set the low and high values? the whole rotary encoder edit page should look like this (for every encoder): control= sysex
disp type= 0-127
lowval=0
highval=127
ports= u1, M1
lenght=9
Data type= roland
datapsn= 8
and do the delaytime snaphot work?
  The topic has been locked.
#77201
King Koopa
Posts: 295
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
if someone has problems with this template. here's the new version (all checked and working): http://www.sendspace.com/file/5ab5ks
  The topic has been locked.
#77204
Chain Chomp
Posts: 392
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
OK I have it working now, thanks. When Data type was on ROLAND, Length and Datapsn were locked on 10 & 9, so I changed Data type to SINGLE and put your numbers in for Length & Datapsn... seems to work well now!
  The topic has been locked.
#77209
King Koopa
Posts: 295
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
great. have fun with it.
would be nice if someone could extend this template with some other nice features. don't get me wrong, i would do it by myself but it would go for years til i understand everything about sysex and hex values and...............
  The topic has been locked.
#77506
Goomba
Posts: 30
Re:Machinedrum Remote sl25 Template to control machine fx 7 Years, 8 Months ago
Great! work with Remote Zero SL !

Really cool mate…

THANKS & all the best in 2010!
  The topic has been locked.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop

Login Form

start Player