As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.
Elektron-Users Elektron Forum Sandbox Re:Monomachine control with QuNexus to mimic SFX-6 (1 viewing)
Go to bottom Post Reply
TOPIC: Re:Monomachine control with QuNexus to mimic SFX-6
#234200
Cappy
Posts: 108
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
Been waiting ages for this to be released in Europe....
It looks absolutely perfect, but it's not available here yet
  The topic has been locked.
#234202
Goomba
Posts: 29
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
You mean QuNexus isn't available in your area? Where in Europe are you? I'm 99% sure they are available but I will check with folks at my work today for you.
  The topic has been locked.
#234207
Goomba
Posts: 29
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
Hey, I just checked. It is definitely available in Europe. Here's a link for you...

http://www.dv247.com/computer-hardware/keith-mcmillen-qunexus-midi-keyboard-controller--105389

...(ok in this post I am being a salesman haha )...
  The topic has been locked.
#234210
Cappy
Posts: 108
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
That's brilliant - thank you
I'm in Denmark, and usually shop in Germany.....shame on me
Can you clarify one thing for me... Why do I need the softstep controller ?
It will run as a standard midi controller as well.... Without the softstep...right?

Thanx for the link...ordering NOW
  The topic has been locked.
#234212
Goomba
Posts: 29
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
Hey, happy to clarify. QuNexus is a standard midi controller. You do not need the SoftStep controller as well (though it is useful too haha). SoftStep is a different midi controller that we make for your feet:

http://www.keithmcmillen.com/softstep/overview

However, QuNexus uses a micro USB connector:

http://www.keithmcmillen.com/QuNexus/faqs/#1643268-what-kind-of-usb-port-does

So if you want to plug it directly into the Monomachine using a standard 5-Pin MIDI cable without using a computer with a midi interface, you need to also get the MIDI Expander:

http://www.keithmcmillen.com/expander/overview

Let me know if you need a link for where to buy one in Europe. Does that answer your question?
  The topic has been locked.
#234213
Cappy
Posts: 108
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
Hmmm they're using verified by visa which is not supported by my bank yet
Must wait 'till it's in stock in Denmark or germany!
  The topic has been locked.
#234214
Cappy
Posts: 108
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
I have the iconnect midi - will that work?
  The topic has been locked.
#234215
Goomba
Posts: 29
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
I will check. I'm also going to see if I can get you a different link.
  The topic has been locked.
#234217
Goomba
Posts: 29
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
OK, here's another link in Germany:

http://rockshop.de/en-de/products/32077

And I'm waiting to hear back for sure whether or not your interface will work. I'll let you know.

Thanks for your interest!
  The topic has been locked.
#234233
Cappy
Posts: 108
Re:Monomachine control with QuNexus to mimic SFX-6 10 Years, 7 Months ago
You've been veryhelpfull - thank you!
Turns out it's my new bank that's using systems my old one didn't
But I'm suspicious about pop ups requiring me to give away my card details
So I'll wait for local availability
  The topic has been locked.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop

Login Form

start Player