make the amp envelope release setting minimum value be 1 (i.e. not zero). i have noticed clicking to occur if this is not set.
i know this is easy to correct manually, but would be nice as it would make turning knobs a tad easier... so you wouldn't have to tweak the knob back up to 1 each time.
Anyways, when you use a synced delay, the time knob should switch to note values rather than the standard 1-128. It seems it would be easier to set up of it was in fractions.
Anyways, when you use a synced delay, the time knob should switch to note values rather than the standard 1-128. It seems it would be easier to set up of it was in fractions.
Since the OT has independent track length and clock multipliers, note lengths would be more confusing. Length defined by number of steps is the way to go. Just create a chart for the scales and notes you use most.
Not sure if this is the right thread for bug reports but here goes:
Latest OS.
I sampled electric bass notes from input B. I sliced the sample. I played the slice notes into the grid in realtime and everything played as it should. I saved the project several times. Turned off the OT. Next day I restarted the project. Pressed play. Bass notes were sliced wrong: at least their start positions where in wrong places. I reloaded the project. Exact same results.
Has this bug been reported already or did I find a new one?
MnM MKII + MDUW MKII + OT + A4 + Eurorack Modular System
Re:OT feature requests 11 Years, 3 Months ago
Kraku wrote: Not sure if this is the right thread for bug reports but here goes:
Latest OS.
I sampled electric bass notes from input B. I sliced the sample. I played the slice notes into the grid in realtime and everything played as it should. I saved the project several times. Turned off the OT. Next day I restarted the project. Pressed play. Bass notes were sliced wrong: at least their start positions where in wrong places. I reloaded the project. Exact same results.
Has this bug been reported already or did I find a new one?
It is best to report bugs directly to elektron. There is no guarantee that elektron is reading this forum. You can report bugs from the customer zone at the elektron web site.
Kraku wrote: Not sure if this is the right thread for bug reports but here goes:
Latest OS.
I sampled electric bass notes from input B. I sliced the sample. I played the slice notes into the grid in realtime and everything played as it should. I saved the project several times. Turned off the OT. Next day I restarted the project. Pressed play. Bass notes were sliced wrong: at least their start positions where in wrong places. I reloaded the project. Exact same results.
Has this bug been reported already or did I find a new one?
You say you saved the project several times, did you save the sample settings? :-
"SAVE SAMPLE SETTINGS will save the trim, slice and attribute settings in a separate file and link it to the sample currently being edited. Next time the sample is loaded to a Flex or Static sample slot it will be loaded together with the saved sample settings. This will occur even if the sample is loaded in another project. Hence this command is very useful if you for example want a loop to always contain the same slice settings when being loaded."
From the manual, page 104.
If you don't save the sample settings, slices will not be saved, and your sample will not playback correctly, as you described.
