As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.
Elektron-Users Elektron Forum Elektron Gear bug scrolling thru sounds on a4 (1 viewing)
Go to bottom Post Reply
TOPIC: bug scrolling thru sounds on a4
#129725
Re:Official Elektron MM & MD 'Bug' List 13 Years, 2 Months ago
On Monomachine:

When I set the scale of a track to C major for example
and play on the sequencer buttons then it's ok.

But when I press record+play and play the same melody
the scale setting seems to have changed.

Then when the notes come around again after they have been recorded
then they are correctly played according to the scale setting.

It's only after pressing rec+play and playing a track set to a certain scale
that the scale setting seems to have been changed.
  The topic has been locked.
#130002
Game & Watch
Posts: 1910
Re:Official Elektron MM & MD 'Bug' List 13 Years, 1 Month ago
Here's a bug on the latest Monomachine OS. I don't have quite all the details but here is what I have. I have done this a couple of times now so it is reproducible here.

Press Record to go into step record mode. Press a trig as if you are going to P-Lock. (Maybe hold down the trig then) press Function-Arp to edit an Arp. Play around with Arp settings. Now, try to get out of the Arp menu by pressing Exit/No. The Arp menu cannot be removed. Button presses will sometimes make changes in the menu behind the Arp menu. However, the Arp menu stays in focus. Shutting off machine and restarting dismisses the Arp menu.

Emailed HQ.
  The topic has been locked.
#135314
Re:Official Elektron MM & MD 'Bug' List 13 Years ago
MACHINEDRUM SPS-1UW MKII
OS 1.62

Loading a machine MID.
Assign the "LFO" to parameter "NOTE"
It seems not work.

Another strange thing loading a machine CTR-AL,
the parameters never reach the minimum or maximum value, they are always one step more, or less.
Moving the knob it reaches 0, but returns to 1, reaching a value 64 back to 63.

It happens only to me?
  The topic has been locked.
#135566
Re:Official Elektron MM & MD 'Bug' List 13 Years ago
Please guys give me feedback on this to report it to Elekron Support.
  The topic has been locked.
#138433
Re:Official Elektron MM & MD 'Bug' List 12 Years, 11 Months ago
Not sure if this is the right place for OT bugs or if it has been discussed but last night when copying a part to another part, all of the effects are setup properly, but I have to go through each one and kind of re-set them, otherwise the track still thinks it is loaded up with the default effects (Filter, delay). I re-set all the effects and parameters and then went to store the part and suddenly it reverts back what the orignal part should have been, very loud like. I don't know, seems like a bug to me.
  The topic has been locked.
#138903
Goomba
Posts: 1
Re:Official Elektron MM & MD 'Bug' List 12 Years, 11 Months ago
My SPS-1UW does a long glitching sound when i turn it on and it can last for half an hour! I uploaded the sound for you:
http://www.sendspace.com/file/yuww03
I hope you can solve my problem because i want to play live with the machine and with this glitch is impossible.
All best from Bunenos Aires,
J.
  The topic has been locked.
#139939
Re:Official Elektron MM & MD 'Bug' List 12 Years, 11 Months ago
OT BUG: OS 1.0

When using the arranger, after attempts to go back to pattern and edit pattern, the trig buttons are no longer editable or do they function at all. Reboot required each time.

And, why doesn't HALT actually send a MIDI stop message?
I still have to push stop on the OT to get all the drum machines to stop.
  The topic has been locked.
#142417
Goomba
Posts: 1
Re:Official Elektron MM & MD 'Bug' List 12 Years, 10 Months ago
Machinedrum mk1, no UW
Was using 1.53.

Shipped to me 3 days ago. Worked fine for the first 2 days, but then after some idle time, it's knobs and trig buttons responded strange. LED wont turn off after turning on. LED move in one direction no matter datawheel is turned left or right. No sound.

Reboot and it worked again. after some idle time the same happened.

Went into test mode, everything seemed fine.
Factory reset, no luck.
Soft reset, no luck.

Reboot, stayed at the startup screen for 5 minutes, then i didn't look at it. after 20 minutes i found that it's in booted screen. But it's the same problem as before, already.

Upgraded to 1.62. Successfully upgrade. But couldn't boot up still.

SAD!!!!
Is this repairable? Any similar experience?

Thanks!
Newton
  The topic has been locked.
#142649
Chain Chomp
Posts: 383
Re:Official Elektron MM & MD 'Bug' List 12 Years, 10 Months ago
MD - re-recording CTR-AL parameters sometimes won't work in realtime rec. Reselecting the CTR-AL machine in the edit page remedies this, not sure if I'm doing something wrong.

MnM - still getting odd stuck notes in poly mode, I wish they would sort this out.
  The topic has been locked.
#145261
Goomba
Posts: 6
Re:Official Elektron MM & MD 'Bug' List 12 Years, 10 Months ago
Exactly the same here.
  The topic has been locked.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop

Login Form

start Player