Chain Chomp
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
Did you turn up DIR for the proper audio chans in the mixer section?
|
|
|
|
The topic has been locked. |
Chain Chomp
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
Here's the basic setup from scratch:
1) Hit midi
2) double click the first page
3) select midi chanel
4) HIT ENTER (or it won't remember)
that's it.
You can test it out by playing in chromatic mode.
other than that, make sure your audio setting are setup properly too.
|
|
|
|
The topic has been locked. |
Goomba
0
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
audio thru track 1 vol up at full as well as level, trig 1 on, input set to A (line in A).
leds above the rec buttons are not light....
but have tested the minitaur with npc and all works well.
have I missed something with the input set up?
|
|
|
|
The topic has been locked. |
Goomba
0
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
yep. when im testing as i am now running thru the OT the OT channel on mixer is up. test with audio demo tracks from factory OT, all fine.
Then test running straight out of mintaur ino seperate mixer chanel, nothing....seems like midi error??? I have also changed cable.... still nothing.
easy with mpc2500, no glitches.
|
|
|
|
The topic has been locked. |
Chain Chomp
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
do you get audio from the minitaur with headphones?
|
|
|
|
The topic has been locked. |
Chain Chomp
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
also, don't use a thru track until you get this sorted. just set your DIR up to max on the mixer page. If you have incoming audio the lights will light up.
|
|
|
|
The topic has been locked. |
Chain Chomp
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
you can try it out on your MPC as well (or other gear).
I feel like it's something simple that's being missed..
|
|
|
|
The topic has been locked. |
Goomba
0
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
biologik wrote:
Here's the basic setup from scratch:
1) Hit midi
2) double click the first page
3) select midi chanel
4) HIT ENTER (or it won't remember)
that's it.
You can test it out by playing in chromatic mode.
other than that, make sure your audio setting are setup properly too.
That is all fine. Ive done that set up. Also made sure that all the midi channels are correct and set. Still no sound. just tested again with mpc2500 all works well with the same cables.
OT - no light to show I have plugged in a cable. It flashes momentarily green whilst being pluged in, then off. I have just tested all other ins on OT - A/B/C/D, all the same result.Is there another place to check the OT in set ups???
|
|
|
|
The topic has been locked. |
Goomba
0
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
biologik wrote:
do you get audio from the minitaur with headphones?
Im getting audio from minitaur, just not when its connected to OT. The MPC2500 tested both the midi and audio of the minitaur all worked well. just not with OT. No audio from the minitaur if im running it as a thru machine with the mini track to trigger... and no audio from the direct out of the miniature into the mixer. minitaur led for midi is on.
|
|
|
|
The topic has been locked. |
Chain Chomp
|
|
Re:OCTATRACK Midi Tracks out HELP 11 Years ago
|
|
with that setup it should work fine.. just play the notes in chromatic mode and you should see the little light above the record light up...
|
|
|
|
The topic has been locked. |
|
