Re:Cheeks for your Elektron Gear 13 Years, 5 Months ago
bauer wrote: I'm thinking of fashioning some cheeks of my own... does anyone know the max depth for the screw-holes in the side of the MD? don't want to risk damaging anything inside the unit by going too deep.
I guess that as long as the screw thread is 3 or 4mm longer than the thickness of the cheeks then that should be sufficient?
Elektron site says M3 x 6mm are the screws that come with their rackmount kit.
Re:Cheeks for your Elektron Gear 13 Years, 5 Months ago
order in! ordered 2 pairs (clear) for machinedrum and monomachine. went clear so that i could see my modular cable clutter behind the stands. and yes, screws are needed. thanks!
Re:Cheeks for your Elektron Gear 13 Years, 4 Months ago
A bunch more shipped the other day. Doing another batch this weekend.
I had to pull the order section of my site down temporarily - the volume to time ratio for me has gotten out of control, and I don't want people waiting too long. once I catch up, i'll open that page again....
Re:Cheeks for your Elektron Gear 13 Years, 4 Months ago
just to confirm... these will work with Elektron MKI and MKII devices, correct? In other words, do the cheeks have enough clearance at the bottom to hold a MKI? Thanks!
Re:Cheeks for your Elektron Gear 13 Years, 4 Months ago
Mine came in, off to buy some screws! Will attach them later today, looks great allready! Thanks for the good and fast work and best off luck with your future endeavours!
Re:Cheeks for your Elektron Gear 13 Years, 4 Months ago
husc.sound wrote: Mine came in, off to buy some screws! Will attach them later today, looks great allready! Thanks for the good and fast work and best off luck with your future endeavours!
you should have requested them! if you did and i forgot to pack, i apologize!!!