Elektron-Users

your welcome!

thank you, the same 4 u too!!

hey emtex, I still doesn´t try your template but I was trying to program some SysEx in my remote zero SL and I saw that you have to cut the first and last values of the message in order to let the remote zero accept it...but the bad news is that it doesn´t works anyway...
any suggestions?

Anselmi, try these: for Master FX-Echo one time shots, the button must be set to on/off
Copy/Paste to your editor (assigned to buttons)

F0 00 20 3C 02 00 5D 00 02 F7--------TIME=2
F0 00 20 3C 02 00 5D 00 04 F7--------TIME=4
F0 00 20 3C 02 00 5D 00 08 F7--------TIME=8
F0 00 20 3C 02 00 5D 00 10 F7--------TIME=16
F0 00 20 3C 02 00 5D 00 18 F7--------TIME=24
F0 00 20 3C 02 00 5D 00 20 F7--------TIME=32
(will set time of Master FX echo time to those values)

All master FX echo functions: Assigned to pots/sliders, values 0-127 unless different
F0 00 20 3C 02 00 5D 00 DT 00 7F F7 --TIME
F0 00 20 3C 02 00 5D 03 DT 1E 50 F7 -- FEEDBACK (set 30-80)
F0 00 20 3C 02 00 5D 01 DT 00 7F F7 -- MODULATION
F0 00 20 3C 02 00 5D 02 DT 00 20 F7 ---MOD-FREQ (0-30)
F0 00 20 3C 02 00 5D 04 DT 00 7F F7 --FILTER FREQ
F0 00 20 3C 02 00 5D 05 DT 00 7F F7 -- FILTER WIDTH
F0 00 20 3C 02 00 5D 07 DT 00 7F F7 -- LEVEL

I have Edirol PCR 300 and these messages will function on any midi unit, only change the Letters DT to DV (I believe for remote is DV=data value)

The next Sysex assigns to a button on a midi controller, CTR-ALL, CTR-8P and a blank machine, to MDs' machine 16-M4. Sort of a Multi function, it will scroll thru them, in that order
Function of button set to increasing, (button range set to 111 to 114 ONLY)

F0 00 20 3C 02 00 5B 0F DT 6F 72 F7---------LOAD MACHINES MIDI 16-
CTR- ALL, CTR 8P and Blank machine. [INCR111-114]
They ALL work, tried and tested ...

anybody working on an extended version of this?

I'd be really interested in that Mono template 214 talked about, if he's still around.