Elektron-Users

theb wrote:
I'd like to be able to isolate a machine from global changes.

When tweaking, it'd be nice to keep some machines untweaked. Often this will be the kick drum; when all else is going batshit mental I'd like to keep a pulse going through the noise to let people keep track. I imagine some kind of machine by machine setting that says "ignore" for various fucntions, perhaps 24 ignores, one for each rotary?


A HUGE +1 FROM ME!! This one has been asked for a lot and is a total no brainer (I assume you mean when using Function+Knob and Ctr-All?). Just do it Elektron, please just do it!

Please Microtiming for the MachineDrum !!!!!!!

Mosquera wrote:
Please Microtiming for the MachineDrum !!!!!!!

+1 on this.

also the Parameter Value Skip from the OT would be awesome. lovely to be able to get min/max/middle/useful increments like that. a really nice feature on the OT.

Dear Elektron-Team, my 2 requests here:
It has been invented in OCTATRACK, I think it would be awesome to have this both in MD and MM! I-N-C-R-E-D-I-B-L-E!

::: MONOMACHINE :::
PARAMETER VALUE SKIP
Keeping [FUNCTION] pressed while turning a parameter make the parameter values jump
to relevant positions. For parameters ranging from 0 to 127 either 0 or 127 will be selected.
For parameters ranging from -64 to +64 the values will be set to 564, 0 or +64. Other alter5
natives exist as well, the value of the Echo Freeze Delay TIME parameter will for example
be doubled for each increment. This is useful when using the effect as a repeater.


::: MACHINEDRUM :::
PARAMETER VALUE SKIP
Keeping [FUNCTION] pressed while turning a parameter make the parameter values jump
to relevant positions. For parameters ranging from 0 to 127 either 0 or 127 will be selected.
For parameters ranging from -64 to +64 the values will be set to 564, 0 or +64. Other alter5
natives exist as well, the value of the Echo Freeze Delay TIME parameter will for example
be doubled for each increment. This is useful when using the effect as a repeater.

THANKS!

bauer wrote:
Mosquera wrote:
Please Microtiming for the MachineDrum !!!!!!!

+1 on this.

...



I'd like to see that on the MD, too!

I haven't worked my way through all 53 pages (!) of this thread, so maybe it's already been suggested: on the Machinedrum, I would love to see the ability to route the verb and delay sends to independent outputs instead of the internal verb & delay. The internal verb is only Okay, and I would love to use an external verb, while retaining the ability to dynamically send from individual steps in the pattern.

This probably applies to all Elektron products; I only have the Machinedrum.

I would love to see the ability to route the verb and delay sends to independent outputs instead of the internal verb & delay.

any upgrade into the MD's routing features department would indeed be really appreciated:

- ability to route the sends to individual outputs and internal tracks
- ability to route the reverb and delay output to either individual outputs or internal track
- ability to select what track(s) are routed into the ram machines, not only the main mix
- ability to route any track into another one, to make some busses...

the octatrack seems to go this way, and the MD would be dope if the same features could be implemented...

even if we have to wait for a MK3 model...


cheers

The ability to configure Delay and Reverb Sends on the MD to external output channels instead of using the internal effects.

Great minds think alike.

I really wish there was an adjustable crossfader curve like most dj mixers have it nowadays.

Because when using the crossfader to mix the volumes of MD and Mono or MD and OT for example the volume always gets to low when the fader is in the center position..

edit: doh.. wrong thread