Elektron-Users

nudge all trigs/locks with microtiming resolution

Scene control over midi parameters.

Polyphonic Flex Machines!!!!!!!

A couple more feature requests hopefully not redundant to what's already been stated:

1) Some how extending the functionality of the Track Trig Edit menu to assign trigs to either Scene A or B. Not sure how feasible this would be or how it would work when the fader is between the two scenes. Maybe the volume of the trig could be tied to the fader.

2) Extending the functionality of the USB connection so that it could function to connect to an external break-out box with more audio outputs/inputs. Or maybe just outputs

I would like to be able to reload a pattern from card, I mean the trigs and parameter locks how they are currently saved on the card. There should be a key combination for this like for reloading a part.

This obviously must be possible because you have to save your patterns by syncing them to the card. Otherwise when you change banks and reboot the machine they are lost.

Wouldn't it be cool to go wild with a pattern by adding trigs wherever you like and just reload it after you're done

A quick way to turn off quantize in live rec mode.

skab wrote:
A quick way to turn off quantize in live rec mode.

+a trilliion!!
Its very far from ergonomic the way quantise mode is implemented.

I think it has everything I need now almost... Just independent nudge buttons for each track and granular machines and it'll be perfect...

Scene control over midi parameters. (I ask again )

Another feature request just for the fun of it:

The ability to control track parameters from the amplitude of the audio coming in at the inputs. Maybe as an extension of the setup menu for the THRU machine (the menu that comes up when you hit playback twice). There are some empty slots that could be used to route the signal to specific parameters.

or

This could be a separate Effect that could be used on any track and used control parameters within the track or other tracks.