As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.
Elektron-Users Elektron Forum Elektron Gear Re:OT - answers sticky: PLEASE READ (1 viewing)
Go to bottom Post Reply
TOPIC: Re:OT - answers sticky: PLEASE READ
#114021
Game & Watch
Posts: 2845
0
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
Trim screen OS V0.99

Pressing encoder 1 jumps to start position
Pressing encoder 3 jumps to end position
Pressing level encoder scrolls waveform as it plays (toggle)
Encoder 1 sets start point
Encoder 2 sets loop point
Encoder 3 sets end point
Encoder 4 zooms vertical zoom
Encoder 5 moves cursor
Encoder 6 set horizotal zoom
  The topic has been locked.
#114025
Cappy
Posts: 59
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
the volume coming out of my mains is not affected by the volume control. it seems to always be at full tilt. even with the volume turned all the way down.

is this a known bug?
  The topic has been locked.
#114036
Game & Watch
Posts: 2845
0
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
Not a bug, it is stated in the manual that the volume is for the headphones - caught me out at first too, I think it makes sense in a DJ environment but I'd prefer the option to have it affect the main outs, maybe it will be addressed in a later OS (hope so)
  The topic has been locked.
#114042
Admin
Posts: 2932
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
I'd ask that for those posting what they believe are bugs, that they indicate whether they have sent them on to Elektron or not.

Thanks!

M
  The topic has been locked.
#114128
Boo
Posts: 129
0
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
When the mixer is open while playing a pattern of more than 16 steps, the LEDs above the Scale Setup no longer track the play position correctly. Most of the time they're static, remaining lit according their status when the Mixer button was pushed, but sometimes the yellow LED will e.g. jump from the 1:4 position to the 4:4 position and then stay there. (V0.99)

EDIT - sent to Elektron.
  The topic has been locked.
#114132
Boo
Posts: 129
0
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
Not a bug (maybe planned for later implementation?) but I'd really like to see "sticky" keys for Pattern selection - like on the MD - where if you press the Pattern key, you have "around two seconds" for selecting a pattern; you don't need to hold down both the Pattern Key and the Trig key at the same time to select the pattern.
  The topic has been locked.
#114209
Cappy
Posts: 92
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
Ok, something that happened during a recent performance whilst loading
a sample into flex:



Booting up into the testmenu would state following



does also not dissappear ever since, though empty reset was done
Any of you guys know what ATA could mean?
Will send that to elektron.

-mael

ps.: no, did not try to bend it in any way....
  The topic has been locked.
#114212
Admin
Posts: 2932
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
maelstrom wrote:
Ok, something that happened during a recent performance whilst loading
a sample into flex:



Booting up into the testmenu would state following



does also not dissappear ever since, thought empty reset was done
Any of you guys know what ATA could mean?
Will send that to elektron.

-mael

ps.: no, did not try to bend it in any way....


mael - were you able to reboot after the exception error? did you try rebooting normally after trying test mode?
  The topic has been locked.
#114214
Cappy
Posts: 92
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
@ papertiger

you mean simply powering off?
Yes, did that as a first step, nothing changed after rebooting, an exception would still be on the screen, similar to the one above. OT was unusable till empty reset.
(didn't make a picture of that errorcode, looked slightly different as far as a I remember, but to my defense, I was in a live situation, kind of stressed )

OT works fine since then, except for recording from the externals, which we all know have been somewhat difficult to use. Still haven't figured that one out.
  The topic has been locked.
#114216
Admin
Posts: 2932
Re:OT - answers sticky: PLEASE READ 13 Years, 2 Months ago
@ mael

phew, I'm glad it seems to be working. . .? goes without saying -- DEFINITELY send that one in to Elektron!

M
  The topic has been locked.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop

Login Form

start Player