As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.
Elektron-Users Elektron Forum Other Gear Two Tier Elektron Cheeks... (1 viewing)
Go to bottom Post Reply
TOPIC: Two Tier Elektron Cheeks...
#211001
Cappy
Posts: 100
Re:Two Tier Elektron Cheeks... 11 Years, 1 Month ago
thanks for the kind word on the bamboo! I'll be looking into these as permanent options for sure.

I actually reached out to Elektron regarding the vent holes and they actually said that their own rack ears don't have vent holes leading me to think that the holes are not necessary. I am still torn as to the placement of the holes anyway - all so far have been on the top tier. i was thinking of adding them to both tiers so the user could chose or move it - which is what prompted me to query the source: elektron.
  The topic has been locked.
#214024
King Koopa
Posts: 237
Re:Two Tier Elektron Cheeks... 11 Years, 1 Month ago
[url]http://i.ebayimg.com/00/s/MTYwMFgxNjAw/z/JJ0AAMXQqBxRHC6K/$T2eC16RHJFoE9nh6nwCEBRHC6KJMBg~~60_59.JPG[/url

Does anyone know who make this?
  The topic has been locked.
#214026
Cappy
Posts: 70
Re:Two Tier Elektron Cheeks... 11 Years, 1 Month ago
I emailed the seller for those. He said he would sell them to me for $129 per set. I think he makes them.
  The topic has been locked.
#214058
King Koopa
Posts: 237
Re:Two Tier Elektron Cheeks... 11 Years, 1 Month ago
Hi, does anyone know who makes these cheeks?
http://www.ebay.com/soc/itm/290863085370?roken=A37GqK
  The topic has been locked.
#214061
Yoshi
Posts: 960
Re:Two Tier Elektron Cheeks... 11 Years, 1 Month ago
Artsutanov wrote:
Hi, does anyone know who makes these cheeks?
http://www.ebay.com/soc/itm/290863085370?roken=A37GqK


Looks like that design blocks the cooling vent on the A4.
  The topic has been locked.
#214062
King Koopa
Posts: 237
Re:Two Tier Elektron Cheeks... 11 Years, 1 Month ago
good to know, although i'm thinking more of a 2 x OT setup or OT + MD. Cheers!
  The topic has been locked.
#218076
Cappy
Posts: 100
Re:Two Tier Elektron Cheeks... 11 Years ago
Those are made out of foam. Unsure of the stability/durability. I did not make those.

Perfect Circle will be carrying some of my cheeks soon.

Another satisfied bamboo customer below. He also added that he had his OT fit in the bottom row easily by doing the following:
"I just took the lower screws holding the MD out, rotated it a little, put the cables in and then rotated it back and fastened the screws again."



I have setup all batches moving forward to have circular vent holes for A4 users. They will be on the top and the bottom so the user can choose to move their units around freely.

Thanks for everyone's continued support.
  The topic has been locked.
#218077
Cappy
Posts: 100
Re:Two Tier Elektron Cheeks... 11 Years ago
  The topic has been locked.
#223071
Cappy
Posts: 100
Re:Two Tier Elektron Cheeks... 10 Years, 11 Months ago
In case anyone has wondered - these work great with the PL-1 dust covers... Two tiered versions should work the same, but will be confirming soon.

Image supplied by a user - Thanks Mark!

  The topic has been locked.
#223258
Goomba
Posts: 2
Re:Two Tier Elektron Cheeks... 10 Years, 11 Months ago
The black end cheeks that you see in the Perfect Circle Audio listings were made by jninek.com.
They were $60/pr + s/h when I bought them, though they are not currently listed.
They are make out of expanded PVC and quite sturdy.

I will have to check whether the present a ventilation hazard to the A4.
If they do it shouldn't be to hard to drill a few vent slots.
I like them but I can imagine that something that allowed the angle to adjusted might be more useful, especially if you are gigging.
  The topic has been locked.
Go to top Post Reply
Powered by FireBoardget the latest posts directly to your desktop

Login Form

start Player