Elektron-Users

This is a program I made on my Control Freak (version with 16 sliders and 16 buttons). Currently, sliders 1-16 control the level of each of the MD's 16 tracks. Buttons 1-16 act as alternate note triggers for each of the MD's 16 tracks. In the very near future I plan to see if I can't use the 16 buttons to act as mute/unmute buttons, which I think will be of great use. As I understand it, currently the MD does not have dedicated mute/unmute communication features, but the Control Freak allows for stringing together multiple messages...so I'll give it a try. Charles Choc, Jr. cchocjr@bellsouth.net cchocjr@mac.com

Nice to have this. Really good fun being able to play with the efx and have control over the mutes or filters at the same time.

Simple preset I use when I connect my monomachine.

Channel 0: is sending the signal to the selected track on the monomachine

channel 1-6: sends midi to the indivdual tracks corresponding to the track #

 Please add to this if you have any ideas!

This is a device panel I have started making for the Elektron Machine Drum to provide machine and master editor from within Cubase SX v3. This is basically an alpha version just to check that all the controls have been mapped properly, and to test the viability of such a huge layout (vs lots of separate panels). Please post bugs/comments to either elektron users forum, or PM me here. http://www.elektron-users.com/ is the only acknowledged download point for this. Its my first attempt at creating a large panel for Cubase so be warned :)

Document linked to :http://www.divshare.com/download/11750688-f78 Link created on :Sat, 2010-Jun-19 08:43

 

Excel template I created to help me merge songs.

This is a little Cocoa app for managing Analog Four sound patches. It's made for renaming and repositioning sounds outside of the A4. You can open as many sounds as you like and send your changes directly to the A4 or save them to disk.

Questions? Thread:  http://elektron-users.com/index.php?option=com_fireboard&Itemid=28&func=view&catid=9&id=219446#219446

Nice to have this. Really good fun being able to play with the efx and have control over the mutes or filters at the same time.

Just a simple starting point for editing the Analog Four with lemur. It uses only the CC parameters. No NRPN used in this template. I have no intentions to continue working on this template, so feel free to do whatever you like with it.

Ronald 

 

Template #2 for MD and PCR-300 500 800 This one is to make filter frequency sweeps

EVERYTHING else is the same as template #1

R1-R8  and S1-S6 are FILTER  BASE FREQUENCY for instant tweak of filter for any of 14 machines (1-14)

UPDATE: R-9 TIME MOD-1-127

                H-1 LEVEL RE-BOX MASTER FX

               S-7 S-8 FILTERS FRQ ,WIDTH- RE-BOX MASTER FX RANGE 0-127

               S-9 FEEDBACK MASTER FX RE BOX RANGE= 0-70

This is a patch for Sensomusic Usine that with the push of one preset manager button sends the Machinedrum a Program Change Message as well as set the initial state of all the mutes for the new pattern. Also, you can recall visual cues for which instrument you have on each track. This patch works fine in Usine Free version.

 This was hastily adapted from a larger workspace in Usine, so hopefully no bugs :)

This is a patch for the Nord Modular G2 that makes it possible to play the Monomachine "polyphonically" when not in poly-mode (e.g. use 3 channels on the Mono, get a 3 note polyphonic synth and still have 3 tracks for mono-synths or FX left). Read the textpad in the patch for more info. /Mm

Machinedrum control template for the Bitstream 3X

 This version controls LFO depth, Distortion, Filter Frequency, SSR and push mutes (Vol 0 or 127) for each individual track. More to come.