Elektron-Users

Basic template for Behringer BCF2000 to control the Machinedrum.

 

 

4 ch dedicate to Ableton live ( Level-Filter-Send A-Send B ) with Ableton template inclusive and 4 ch dedicate to Sps-1 ( Level-LFO amount-Rev send-Delay send )

 

Machinedrum template for BCR2000

encoder groups 1-4 ; rhythm echo, gate box, eq, dynamix

buttons 1-16; track mute

encoders row 2-3; track delay send

This is a patch for the Nord Modular G2 that makes it possible to play the Monomachine "polyphonically" when not in poly-mode (e.g. use 3 channels on the Mono, get a 3 note polyphonic synth and still have 3 tracks for mono-synths or FX left). Read the textpad in the patch for more info. /Mm

Template #2 for MD and PCR-300 500 800 This one is to make filter frequency sweeps

EVERYTHING else is the same as template #1

R1-R8  and S1-S6 are FILTER  BASE FREQUENCY for instant tweak of filter for any of 14 machines (1-14)

UPDATE: R-9 TIME MOD-1-127

                H-1 LEVEL RE-BOX MASTER FX

               S-7 S-8 FILTERS FRQ ,WIDTH- RE-BOX MASTER FX RANGE 0-127

               S-9 FEEDBACK MASTER FX RE BOX RANGE= 0-70

A Machinedrum editor for Mac OS X.

Midi Implementation Virus TI (CC List)

This is a Ableton Live Max4Live basic MIDI patch for the Monomachine.

All 56 Midi CC synth settings are accessalbe and sequencable. Seperated by 7 "Tabbed" pages in the same order as the MnM.
Unfortunitly Max4Live is required for you to use this patch in Ableton.

This is a patch for Sensomusic Usine that with the push of one preset manager button sends the Machinedrum a Program Change Message as well as set the initial state of all the mutes for the new pattern. Also, you can recall visual cues for which instrument you have on each track. This patch works fine in Usine Free version.

 This was hastily adapted from a larger workspace in Usine, so hopefully no bugs :)

A JPG file containing 16 labeled boxes, for you to write in pattern info as a reference for performing live on the machinedrum and monomachine.

Document linked to :http://www.divshare.com/download/11750688-f78 Link created on :Sat, 2010-Jun-19 08:43

 

Excel template I created to help me merge songs.

Hi all,

 This is a firmware i wrote for the Ruin & Wesen mini command for external control of Octatrack FX, as well as porting the Wesen Supatrigga functionality from his MD Live sketch. See notes below.

cheers,

Tyrone

 

//  OT Live Sketch

// Note - this sketch assumes that you have:
//    RAM RECORDER machine on OT Track 5.  From memory I think you need to set the length to be 32 steps / 2 bars long.
//    MD running through a THRU machine on OT Track 6
//    MNM running through a THRU machine on OT Track 7
//    Filter FX assigned to FX block 1 on the THRU and RAM RECORDER machines
//    DJ EQ FX assigned to FX block 2 on the THRU and RAM RECORDER machines
//

// Notes on Variables:  update midi channels below for your setup if required
#define RECORDER_MIDI_CHANNEL (5 - 1)  // OT Track / Midi Channel 5
#define MD_THRU_MIDI_CHANNEL (6 - 1)  // OT Track / Midi Channel 6
#define MNM_THRU_MIDI_CHANNEL (7 - 1) // OT Track / Midi Channel 7
#define TETRA_MIDI_CHANNEL (12 - 1) // Midi Channel 12
#define CC_FX_1_PARAM_1 34  //FILTER BASE
#define CC_FX_1_PARAM_2 35  //FILTER WIDTH
#define CC_FX_2_PARAM_4 43  //EQ LOW GAIN
#define CC_FX_2_PARAM_6 45  //EQ HI GAIN
#define CC_PLAYBACK_PARAM_2 17  //RECORDER START
#define CC_PLAYBACK_PARAM_4 19  //RECORDER RATE

// General Notes - Firmware has two main "modes": 
// 1.0  Mode 1 - "THRU" machine mode.  Give control of FX on THRU machines. 
// 1.01 There are two pages in "THRU" machine mode.  To toggle between the two pages, press button 1 (top left) when in "THRU" machine mode.
// 1.1  Page 1 - DJEq Page - control of Low and Hi EQ for "MD THRU" and "MNM THRU"
// 1.11 Pressing an Encoder will "cut" the EQ to 0 or toggle it back to its previous value.  An asterix is displayed next to the encoder name to show when EQ "cut" is active
// 1.12 Holding Button 2 (bottom left) and pressing an encoder will restore the EQ back to 64 and disable "cut" mode
// 1.2  Page 2 - Filter Page - control of Filter Cutoffs for "MD THRU" and "MNM THRU"
// 1.21 Pressing an Encoder will "cut" the cutoff to 0 (BAS) or 127 (WDT), or toggle it back to its previous value.  An asterix is displayed next to the encoder name to show when EQ "cut" is active
// 1.22 Holding Button 2 (bottom left) and pressing an encoder will restore the cutoff back to 0 (BAS) or 127 (WDT) and disable "cut" mode
// 2.0  Mode 2 - "RAM RECORDER" mode.  Give control of FX on RAM RECORDER machine.
// 2.01 There is only one page for this mode which controls both the DJ EQ and Filter FX.
// 2.02 Functionality is same as above for fx controls
// 3.0  To switch from "THRU" to "RAM RECORD" mode, press button 4 (top right). 
// 3.1  To switch from "RAM RECORD" to "THRU" mode, press button 1 (top left).  Once back in "THRU" mode, subsequent presses of button 1 will switch between the two pages of "THRU" mode
// 4.0  Press button three to activate the wesen supatrigga functionality for the RAM RECORDER machine.  This can be activated from any mode/page.