As of September 23rd elektron-users has been replaced by elektronauts.com. Find out what this means here.

//Joystick calibration://

This is how you calibrate the sfx6 joystick.

1. Power up the unit whilst holding the FUNCTION-button.
2. Choose TEST MODE by pressing the first button of the step sequencer.
3. Calibrate the joystick by holding the two OCTAVE keys located to the far right pressed simultaneously while you move the joystick 360 degrees (you should see a little asterisk appear on the screen). Then you let go of the joystick and make sure the parameters visible on the screen reads “80,80”. Then release the two OCTAVE keys. Done.

 
joystick.txt (1906 views) · Last modified: 2009/01/12 07:24 by tIB
 

Login Form

start Player